Command Manual - DLDP
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 DLDP Configuration Commands
Huawei Technologies Proprietary
1-1
Chapter 1 DLDP Configuration Commands
1.1 DLDP Configuration Commands
1.1.1 display dldp
Syntax
display dldp
{
unit-id
|
interface-type interface-number
}
View
Any view
Parameter
unit
-
id
: Unit number of the device.
interface-type
: Port type.
interface-number
: Port number.
Description
Use the
display dldp
command to display the DLDP configuration information of the
specified Unit or the specified port.
The configuration information includes the following:
z
The configuration information of the DLDP-enabled port includes the interval,
authentication mode, password, DLDP operating mode, and handling mode when
a unidirectional link is found.
z
The status information includes the neighbor status, local port status and link
status
z
The neighbor table includes the MAC address, port ID, neighbor status and aging
time items.
Example
# Display information about all the DLDP-enabled ports on Unit 1.
<Quidway> display dldp 1
dldp interval 10
dldp work-mode enhance
dldp authentication-mode none
dldp unidirectional-shutdown manual
The port number of unit 1 with DLDP is 1.