Command Manual – Configuration File Management
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 Configuration File Management
Commands
Huawei Technologies Proprietary
1-11
Description
Use the
display this
command to display the current configuration performed in the
current view. To verify the configuration performed in a view, you can use this command
to display the parameters that are valid in the current view.
Parameters that are the same as the default are not displayed. And parameters
corresponding to the functions that do not take effect are not displayed either.
When you execute this command in different interface views, the configurations
performed in the corresponding interfaces are displayed. When you execute this
command in different protocol views, the configurations performed in the corresponding
protocol views are displayed. And when you execute this command in different protocol
sub-views, the configurations performed in the corresponding protocol sub-views are
displayed.
Related command:
save
,
reset saved-configuration
,
display saved-configuration
,
and
display current-configuration
.
Example
# Display the configuration parameters that take effect in AUX 0 interface view.
[Quidway-ui-aux0] display this
#
user-interface aux 0 4
idle-timeout 0 0
user-interface aux 5 7
user-interface vty 0
authentication-mode none
user privilege level 3
set authentication password simple 123
idle-timeout 0 0
user-interface vty 1 4
authentication-mode none
user privilege level 3
set authentication password simple 1
idle-timeout 0 0
#
return
1.1.5 reset saved-configuration
Syntax
reset
saved-configuration
[
backup
|
main
]