Command Manual – System Maintenance and Debugging
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 3 Device Management Commands
Huawei Technologies Proprietary
3-10
Use the
undo schedule reboot
command to cancel the scheduled reboot.
By default, no scheduled reboot is set on the switch.
Note:
There is at most one minute defer for scheduled reboot, that is, the switch will reboot
within one minute after waiting for the specified delay.
You can set the reboot waiting delay in two formats: the hours:minutes format and the
absolute minutes format, and both must be less than or equal to 30 × 24 × 60 (that is, 30
days).
After you execute the command, the system will prompt you to confirm. Enter "Y" or "y"
for your setting to take effect. Your setting will overwrite the old one (if available).
If you adjust the system time by the
clock
command after executing the
schedule
reboot delay
command, the
schedule reboot delay
command will be invalid and the
scheduled reboot will not happen.
Related command:
reboot
,
schedule reboot at
,
undo schedule reboot
, and
display
schedule reboot
.
Example
# Suppose the current time is 05:02, schedule a reboot so that the switch reboots after
70 minutes.
<Quidway> schedule reboot delay 70
Reboot system at 06:12 2000/04/02(in 1 hours and 10 minutes)
confirm?[Y/N]:y
<Quidway>
3.1.13 schedule reboot regularity
Syntax
schedule reboot regularity at hh:mm period
undo schedule reboot regularity
View
System view
Parameter
hh:mm
: Reboot time of the switch, in the hours:minutes format, where hh ranges from 0
to 24, and mm ranges from 0 to 59.
