Huawei N2000H V3 User Manual Download Page 212

Page: 212 / 279

N2000H V3 Appliance
User Guide

7 Replacing Parts

Issue 04 (2018-11-06)

Huawei Proprietary and Confidential

203



You have removed the supercapacitor from the N2000H V3 if any. For details, see

5.24

Removing a Supercapacitor



You have removed the RAID controller card from the N2000H V3. For details, see

5.22

Removing the RAID Controller Card



You have removed the network interface card (NIC) from the N2000H V3. For details,
see

5.32 Removing a NIC



You have removed all power supply units (PSUs) from the N2000H V3. For details, see

5.4 Removing a PSU



You have removed all cables from the mainboard. The cables include those connected to
the hard disk backplane and the left and right mounting ears.



You have removed all fan modules from the N2000H V3. For details, see

5.10 Removing

a Fan Module

Data



You have determined the position on the N2000H V3 for removing the mainboard.



You have obtained the rack number and chassis number of the N2000H V3, and labeled
its panel to prevent misoperations.

Tools



ESD gloves



Packaging materials, for example, an ESD bag

Procedure

Step 1

Press and hold down the latches on both sides of a fan support, and lift the fan support. Use
the same method to lift the other fan support. See steps (1) and (2) in

Figure 5-62

Summary of Contents for N2000H V3
























































































































































































































































































Search results

Summary of Contents for N2000H V3

Reviews:

Related manuals for N2000H V3

Brands by name

Popular brands

Huawei N2000H V3, User Manual

Search results

Summary of Contents for N2000H V3

Reviews:

Related manuals for N2000H V3

Brands by name

Popular brands