Huawei N2000H V3 User Manual Download Page 143

Page: 143 / 279

N2000H V3 Appliance
User Guide

7 Replacing Parts

Issue 04 (2018-11-06)

Huawei Proprietary and Confidential

134

7.27 Installing a CPU

This topic describes how to install a CPU.

7.28 Removing a DIMM

This topic describes how to remove a dual in-line memory module (DIMM) before replacing
it with a new one.

7.29 Installing a DIMM

This topic describes how to install a dual in-line memory module (DIMM) for a Appliance.

7.30 Removing the Mainboard

This topic describes how to remove the mainboard before replacing it with a new one.

7.31 Installing the Mainboard

This topic describes how to install the mainboard.

7.32 Removing a NIC

This topic describes how to remove a network interface card (NIC) before replacing it with a
new one.

7.33 Installing a NIC

This topic describes how to install a network interface card (NIC).

7.34 Removing a SATA DOM

This topic describes how to remove a Serial Advanced Technology Attachment (SATA) Disk
on Module (DOM) before replacing it with a new one.

7.35 Installing a SATA DOM

This topic describes how to install a Serial Advanced Technology Attachment (SATA) Disk on
Module (DOM) to replace the original one.

7.36 Removing an SD Card

This topic describes how to remove a Secure Digital (SD) card before replacing it with a new
one.

7.37 Installing an SD Card

This topic describes how to install an SD card to replace the original one.

7.38 Removing the Front Hard Disk Backplane

This topic describes how to remove the front hard disk backplane before replacing it with a
new one.

7.39 Installing the Front Hard Disk Backplane

This topic describes how to install the front hard disk backplane.

7.40 Removing the Rear Hard Disk Backplane

This topic describes how to remove the rear hard disk backplane before replacing it with a
new one.

7.41 Installing a Rear Hard Disk Backplane

Summary of Contents for N2000H V3
























































































































































































































































































Search results

Summary of Contents for N2000H V3

Reviews:

Related manuals for N2000H V3

Brands by name

Popular brands

Huawei N2000H V3, User Manual

Search results

Summary of Contents for N2000H V3

Reviews:

Related manuals for N2000H V3

Brands by name

Popular brands