Huawei N2000H V3 User Manual Download Page 202

Page: 202 / 279

N2000H V3 Appliance
User Guide

7 Replacing Parts

Issue 04 (2018-11-06)

Huawei Proprietary and Confidential

193

Figure 7-51

Installing a CPU protective cover

----End

7.27 Installing a CPU

This topic describes how to install a CPU.

Scenarios



Only the personnel authorized by Huawei and Huawei technical support can install a CPU
on a Huawei Appliance.



Do not wear ESD gloves to prevent damage to the pins on the CPU socket.

Install a CPU in any of the following scenarios:



A CPU fails.



A CPU is to be replaced with a new model.

Prerequisites

Conditions



You have powered off the N2000H V3. For details, see

3.2 Powering Off



You have removed the chassis cover from the N2000H V3. For details, see

5.6

Removing the Chassis Cover



You have removed the air duct from the N2000H V3. For details, see

5.8 Removing the

Air Duct

Data

Summary of Contents for N2000H V3
























































































































































































































































































Search results

Summary of Contents for N2000H V3

Reviews:

Related manuals for N2000H V3

Brands by name

Popular brands

Huawei N2000H V3, User Manual

Search results

Summary of Contents for N2000H V3

Reviews:

Related manuals for N2000H V3

Brands by name

Popular brands