Huawei N2000H V3 User Manual Download Page 4

Page: 4 / 279

N2000H V3 Appliance
User Guide

About This Document

Issue 04 (2018-11-06)

Huawei Proprietary and Confidential

iii

Symbol

Description

damage, and environment deterioration.

Change History

Changes between document issues are cumulative. The latest document issue contains all
changes made in previous issues.

Issue 01 (2015-07-25)

This issue is the first official release.

Issue 02 (2015-08-07)

Add the security policy and the maintenance policy of the system for the appliance.

Issue 03 (2017-07-06)

Delete the support for the Virtualization (Hyper-V);

Add the note about the dis-support about the third-party software or applications.

Issue 04 (2018-11-06)

Add the information about the firmware upgrade;

Summary of Contents for N2000H V3
























































































































































































































































































Search results

Summary of Contents for N2000H V3

Reviews:

Related manuals for N2000H V3

Brands by name

Popular brands

Huawei N2000H V3, User Manual

Search results

Summary of Contents for N2000H V3

Reviews:

Related manuals for N2000H V3

Brands by name

Popular brands