Huawei N2000H V3 User Manual Download Page 141

Page: 141 / 279

N2000H V3 Appliance
User Guide

7 Replacing Parts

Issue 04 (2018-11-06)

Huawei Proprietary and Confidential

132

Replacing Parts

About This Chapter

This topic describes the replaceable parts of the N2000H V3 and how to replace them.

Ensure that the obtained spare parts are compatible and function properly before any replacement.

7.1 Replaceable Parts

This topic describes the replaceable parts of the N2000H V3.

7.2 Removing a Hard Disk

This topic describes how to remove a hard disk when replacing it with a new one.

7.3 Installing a Hard Disk

This topic describes how to install a hard disk.

7.4 Removing a PSU

This topic describes how to remove an AC or DC power supply unit (PSU).

7.5 Installing a PSU

This topic describes how to install an AC or DC power supply unit (PSU).

7.6 Removing the Chassis Cover

This topic describes how to remove the chassis cover from the N2000H V3 before replacing
any N2000H V3 part in the chassis.

7.7 Installing a Chassis Cover

This topic describes how to install the chassis cover for the N2000H V3 after replacing one or
more N2000H V3 parts.

7.8 Removing the Air Duct

This topic describes how to remove the air duct.

7.9 Installing an Air Duct

This topic describes how to install an air duct.

7.10 Removing a Fan Module

This topic describes how to remove a fan module before replacing it with a new one.

7.11 Installing a Fan Module

This topic describes how to install a fan module.

Summary of Contents for N2000H V3
























































































































































































































































































Search results

Summary of Contents for N2000H V3

Reviews:

Related manuals for N2000H V3

Brands by name

Popular brands

Huawei N2000H V3, User Manual

Search results

Summary of Contents for N2000H V3

Reviews:

Related manuals for N2000H V3

Brands by name

Popular brands