Huawei N2000H V3 User Manual Download Page 165

Page: 165 / 279

N2000H V3 Appliance
User Guide

7 Replacing Parts

Issue 04 (2018-11-06)

Huawei Proprietary and Confidential

156

Figure 7-20

Installing a supercapacitor tray

----End

7.10 Removing a Fan Module

This topic describes how to remove a fan module before replacing it with a new one.

Scenarios

Remove a fan module before replacing it with a new one.

Prerequisites

Conditions



You have removed the chassis cover from the N2000H V3. For details, see

5.6

Removing the Chassis Cover

Data



You have determined the position on the N2000H V3 for removing a fan module.



You have obtained the rack number and chassis number of the N2000H V3.



You have located the N2000H V3 based on the preceding information, and labeled its
panel to prevent misoperations.

Tools



ESD gloves or ESD wrist strap

Summary of Contents for N2000H V3
























































































































































































































































































Search results

Summary of Contents for N2000H V3

Reviews:

Related manuals for N2000H V3

Brands by name

Popular brands

Huawei N2000H V3, User Manual

Search results

Summary of Contents for N2000H V3

Reviews:

Related manuals for N2000H V3

Brands by name

Popular brands