Huawei N2000H V3 User Manual Download Page 211

Page: 211 / 279

N2000H V3 Appliance
User Guide

7 Replacing Parts

Issue 04 (2018-11-06)

Huawei Proprietary and Confidential

202

Figure 7-61

Installing a DIMM

----End

7.30 Removing the Mainboard

This topic describes how to remove the mainboard before replacing it with a new one.

Scenarios

Remove the mainboard before replacing it with a new one.

Prerequisites

Conditions



You have powered off the N2000H V3. For details, see

3.2 Powering Off



You have removed the chassis cover from the N2000H V3. For details, see

5.6

Removing the Chassis Cover



You have removed the supercapacitor if it is configured. For details, see

5.24 Removing

a Supercapacitor



You have removed the air duct from the N2000H V3. For details, see

5.8 Removing the

Air Duct



You have removed the riser card from the N2000H V3. For details, see

5.12 Removing

the Riser Card



You have removed all dual in-line memory modules (DIMMs) from the N2000H V3. For
details, see

5.28 Removing a DIMM



You have removed all CPUs from the N2000H V3. For details, see

5.26 Removing a

CPU

Summary of Contents for N2000H V3
























































































































































































































































































Search results

Summary of Contents for N2000H V3

Reviews:

Related manuals for N2000H V3

Brands by name

Popular brands

Huawei N2000H V3, User Manual

Search results

Summary of Contents for N2000H V3

Reviews:

Related manuals for N2000H V3

Brands by name

Popular brands