Huawei N2000H V3 User Manual Download Page 163

Page: 163 / 279

N2000H V3 Appliance
User Guide

7 Replacing Parts

Issue 04 (2018-11-06)

Huawei Proprietary and Confidential

154

Figure 7-18

Removing an air duct

----End

7.9 Installing an Air Duct

This topic describes how to install an air duct.

Scenarios

Install an air duct in any of the following scenarios:



An air duct fails.



A CPU, dual in-line memory module (DIMM), or supercapacitor is to be replaced.

Prerequisites

Conditions



You have removed the chassis cover from the N2000H V3. For details, see

5.6

Removing the Chassis Cover

Data



You have determined the position on the N2000H V3 for installing an air duct.



You have obtained the rack number and chassis number of the N2000H V3, and labeled
its panel to prevent misoperations.

Tools

Summary of Contents for N2000H V3
























































































































































































































































































Search results

Summary of Contents for N2000H V3

Reviews:

Related manuals for N2000H V3

Brands by name

Popular brands

Huawei N2000H V3, User Manual

Search results

Summary of Contents for N2000H V3

Reviews:

Related manuals for N2000H V3

Brands by name

Popular brands