User Manual
U-SYS IAD108 Integrated Access Device
Chapter 4 Configuring Data
4-41
Table 4-14
Parameters of the commands used to configure voice users
Item Description
portid
Port number. The ports are numbered from 0 and the value range is
0–7.
telno
Telephone number. It can be a different number from that configured
on the MGC, and it is OK if you do not configure this number. The
telephone numbers of the user ports on the IAD108 are assigned by
the MGC.
mgtelno
Telephone number inside the IAD108. This number is determined by
the IAD108, and there is no restrictions on the value. You can decide
by yourself whether to configure this number or not.
priority
Flag of priority level for the access user. The value can be 0, 1 or 2,
indicating respectively the high, medium or low priority. The default
priority is “low”.
leaveword
Whether support the leave word function of the access user. The
value can be 0 or 1, indicating “support” and “no support”
respectively. The configuration should be the same as that on the
MGC. By default, this function is not supported.
terminalid
Terminal ID, ranging 0–8.
Note:
z
telno
and
leaveword
are decided by the configuration on the MGC. On the
IAD108, only a kind of record mode is configured to facilitate management and
query.
z
When adding or deleting users in batch, values of parameters
telno
and
mgtelno
are that of
startuser
plus 1.
