User Manual
U-SYS IAD108 Integrated Access Device
Chapter 3 Loading Software
3-32
ftp server login username : iad
ftp server login password : 108
ftp
server
directory
name
:
C:\WINDOWS\Desktop\IAD108V2R2
Note:
z
In the above command, “IAD108” is a legal user name in the FTP server, the
password is “passwd”, and the path of the file to be loaded is “C:\IAD108
B01D030”. Such settings must be consistent with those set in FTP Serv-U.
z
To use FTP for loading, first execute command
ftpserver
. After that, carry out
command
write
to save the configurations in command
ftpserver
to the device.
After that, when the device is loaded through FTP in next rebooting, the
command
ftpserver
needs not be carried out.
z
Format of command
ftpserver
:
ftpserver
username password
[
dirname
]
.
In this
command,
username
and
password
are the name and password used to log in
to the FTP server, and
dirname
is the directory name of FTP server. This
command is used in global config mode.
5) On the maintenance terminal, enter command
load packet
to load the package file. During the loading, you can use
command
show progress load
to check the loading
progress.
IAD2000(config)#
load packet ftp 172.21.50.51 iad_packet
Load(backup) begins. This process will take several
minutes. If it is interrupted unproperly, it will fail.
Please wait and check the result.
Besides, you can use command 'show progress load' to
