User Manual
U-SYS IAD108 Integrated Access Device
Chapter 7 Maintaining System
7-19
z
An operator with higher authority can use the command
user disconnect
to reject a logging in Telnet operator who
has a lower authority.
z
You can delete multiple operators in one time.
Example: Delete the operator “aaa”:
IAD2000(config)#
no user name
User Name(<=15 chars):aaa
This user is deleted!
Continue? [Y|N]:n
IAD2000(config)#
7.3.2 Setting Operator Authority
Generally, the authority of an operator has already been set
when the operator was added to the system. If the authority of a
certain operator should be changed, an Admin can do the job. The
authority control among users with different authority levels are as
follows.
z
The super administrator “root” can change the authorities
of all the operators.
z
Admin operators can change the authorities of the Oper
operators and Exec operators, but cannot change that of
himself or other Admin operators.
z
Oper operators and Exec operators cannot change the
authorities of themselves.
Example: Change the authority of operator “aaa” from Exec to
Oper.
IAD2000(config)#
user level
User Name(<=15 chars):
aaa
