User Manual
U-SYS IAD108 Integrated Access Device
Chapter 2 Installing Hardware
2-6
1) Connect female end of the serial port cable to the DB-9
male connector on the PC or terminal that will configure the
IAD108.
2) Connect the DB-9 male connector of the serial port cable to
the configuration port of IAD108.
2.2.3 Connecting Uplink Cable
Due to different uplink modes, IAD108 has three models:
IAD108A, IAD108E and IAD108V correspond to ADSL uplink,
Ethernet uplink and VDSL uplink. The cable connections of them are
introduced. The connection methods for ADSL cable and VDSL
cable are the same and will be introduced together.
I.
IAD108E
IAD108E provides one channel of Fast Ethernet (FE) uplink,
and the uplink cable is a straight-through cable, which consists of two
RJ-45 connectors and a piece of category 5 cable. The appearance
of straight-through cable is as shown in Figure 2-2.
(1)
(2)
(3)
(1)
(2)
(1): Crystal connector
(2): Protection sheath
(3): Category 5 cable
Figure 2-2
Connection of network cable
