User Manual
U-SYS IAD108 Integrated Access Device
Chapter 4 Configuring Data
4-50
Operate as follows:
IAD108A(config)#
spc add start 6 50000 210.11.10.26 50004
name ipspc
Adding SPC succeeded! The SPC index is: 0.
IAD108A(config)#
After the IP SPC is successfully created on IAD108A, the
system returns the index “0”.
IAD108B(config)#
spc add start 1 50004 210.11.252.19 50000
name ipspc
Adding SPC succeeded! The SPC index is: 0.
IAD108B(config)#
After the IP SPC is successfully created on IAD108B, the
system returns the index “0”.
3) Show the configuration results on both IAD108A and
IAD108B.
Operation on IAD108A:
IAD108A(config)#
show spc
{ <cr>|connectid<K>|from-connectid<K> }:
Command:
show spc
------------------------------------------------------
-
index state type Port Port name
0 Normal IP-SPC 6 - ipspc
IAD108A(config)#
