User Manual
U-SYS IAD108 Integrated Access Device
Chapter 7 Maintaining System
7-17
Serial No.
Operation
Command
6
Show operator information
IAD2000>
show terminal
user
{
username
|
all | online
}
IAD2000>
show client
7
Disconnect an operator
IAD2000#
user disconnect
clientid
7.3.1 Adding/Deleting Operator
I.
Adding Operators
Each operator has a unique user name. By default, the system
provides one super administrator, with user name as “root” and
password as “admin”. The requirements on user name and
password are as follows.
User name: It consists of 1–15 printable characters (without
spaces in between). There mustn’t exist two identical names.
Password: It can be set by the user, containing 1–15 characters.
It must be correctly inputted when logging in.
When an operator logs in, and the user name matches the
password, the system will check whether the user name is in use. If
the user name has been registered on the Console, the system will
decide whether to accept or reject the login request according to the
configured number for allowed users.
You can add multiple operators at one time, and at most 126
operators can be added to the system.
