User Manual
U-SYS IAD108 Integrated Access Device
Chapter 4 Configuring Data
4-21
ip address : 172.21.100.16
subnetwork mask: 255.255.0.0
default gateway: 172.21.200.250
--------------------------------------------------
IAD2000(config)#
II.
Configuring IAD108 to Obtain IP Address Through DHCP
To dynamically obtain the IP address, IAD108 needs to
cooperate with DHCP server, and the DHCP server in the network
must work and communicate with IAD108 normally.
When configuring data for IAD108, you can execute command
dhcp enable
to start the DHCP client. The commands are listed in
Table 4-6.
Table 4-6
Commands used to obtain IP address dynamically
Operation Command
Prohibit DHCP
IAD2000(config)#
dhcp disable
Refresh IP address
IAD2000(config)#
dhcp renew
Example: Configure IAD108 to dynamically obtain the IP
address through DHCP.
1) Check the current configuration of IAD108 before
configuring it.
IAD2000(config)#
show ip address
--------------------------------------------------
ip address : 172.21.100.16
subnetwork mask: 255.255.0.0
