User Manual
U-SYS IAD108 Integrated Access Device
Chapter 7 Maintaining System
7-35
z
Runs the command
show log list
username
[
date
] to
show the log list of a certain operator.
z
Run the command
show log list
all
[
date
] to display the
log lists of all the operators.
You can query the log records according to specific operator, or
according to time segment. If you do not specify the time segment, all
the records will be shown.
Through this command, the configuration made on the device
through command line terminal can be queried. Meanwhile, you can
also see what kind of configurations have been made on the device
by which operator. If any user is found to be doing illegal
configurations or is harming the equipment, their operation
authorities are to be degraded or canceled.
Note:
For operation commands that are relatively long, if you use command
show log list
to query, only the several characters in the front part are displayed with “...” as
abbreviation. If detailed information is needed to be shown, you can use the
command
show log detailed
.
Example: Show the operation log of user “root”
IAD2000>
show log list root
{ <cr>|date<D><yyyy-mm-dd> }:
Command:
