Huawei AR1200-S Series Configuration Manual Download Page 111

Page: 111 / 308

NAC Configuration

About This Chapter

This chapter describes the NAC system architecture, principles, and authentication methods.

Network access control (NAC) is an end-to-end access security framework and includes Web
authentication, 802.1x authentication, and MAC address authentication.

5.2 NAC Features Supported by the AR1200-S

The AR1200-S supports multiple authentication and control methods to control user authorities
and access areas.

5.3 Configuring 802.1x Authentication

You can configure 802.1x authentication on an interface to authenticate access devices
connected to an interface of an access control device on a LAN.

5.4 Configuring MAC Address Authentication

After MAC address authentication is configured, the AR1200-S uses the user MAC address as
the user name and password for authentication.

5.5 Maintaining NAC

This section describes how to maintain NAC.

5.6 Configuration Examples

This section provides several NAC configuration examples.

Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security

5 NAC Configuration

Issue 02 (2012-03-30)

Huawei Proprietary and Confidential

Summary of Contents for AR1200-S Series





















































































































































































































































































































Search results

Summary of Contents for AR1200-S Series

Reviews:

Huawei AR1200-S Series, Configuration Manual, Page: 111 / 308

Search results

Summary of Contents for AR1200-S Series

Reviews: