manualshive.com logo in svg

Huawei AR1200-S Series, Configuration Manual, Page: 189 / 308

Share
Download
Huawei AR1200-S Series Configuration Manual Download Page 189

The system view is displayed.

Step 2

Run:

cpu-defend policy

 

policy-name

The attack defense policy view is displayed.

Step 3

Configure the rate limit.

l

Run:

packet-type

 

packet-type

 

rate-limit

 

rate-value

The rate limit for packets sent to the CPU is set. Excess packets are discarded.

l

Run:

deny

 

packet-type

 

packet-type

The AR1200-S is configured to discard packets of a specified type sent to the CPU. That is,
the rate limit for packets of the specified type to be sent to the CPU is 0.

By default, the AR1200-S applies the rate limit defined in the 

default

 attack defense policy to

the packets sent to the CPU.

----End

9.4.5 (Optional) Setting the Priority of Protocol Packets

After an attack defense policy is created, set the priorities of protocol packets in the attack defense
policy so that packets with higher priorities are processed first.

Procedure

Step 1

Run:

system-view

The system view is displayed.

Step 2

Run:

cpu-defend policy

 

policy-name

The attack defense policy view is displayed.

Step 3

Run:

packet-type

 

packet-type

 

priority

 

priority-level

The priority of protocol packets sent to the CPU is set.

By default, the priority defined in the 

default

 attack defense policy is used for protocol packets

sent to the CPU.

----End

9.4.6 (Optional) Configuring the Rate Limit for All Packets Sent to
the CPU

After an attack defense policy is created, set the rate limit for all packets sent to the CPU in the
attack defense policy. The AR1200-S then randomly discards the packets that exceed the rate
limit to protect the CPU.

Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security

9 Local Attack Defense Configuration

Issue 02 (2012-03-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

175

Summary of Contents for AR1200-S Series





















































































































































































































































































































Reviews:

No comments