Huawei AR1200-S Series Configuration Manual Download Page 182

Page: 182 / 308

Local Attack Defense Configuration

About This Chapter

This section describes configuration procedures for local attack defense and provides
configuration examples.

9.1 Local Attack Defense Overview

This section describes the background and functions of local attack defense.

9.2 Local Attack Defense Features Supported by the AR1200-S

This section describes local attack defense features supported by the AR1200-S.

9.3 Configuring Attack Source Tracing

The attack source tracing function checks for attack packets sent to the CPU and notifies users
by sending logs or alarms.

9.4 Configuring CPU Attack Defense

CPU attack defense limits the rate of packets sent to the CPU to protect the CPU.

9.5 Maintaining the Attack Defense Policy

This section describes how to maintain the attack defense policy.

9.6 Configuration Examples

This section provides attack defense policy configuration examples.

Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security

9 Local Attack Defense Configuration

Issue 02 (2012-03-30)

Huawei Proprietary and Confidential

168

Summary of Contents for AR1200-S Series





















































































































































































































































































































Search results

Summary of Contents for AR1200-S Series

Reviews:

Huawei AR1200-S Series, Configuration Manual, Page: 182 / 308

Search results

Summary of Contents for AR1200-S Series

Reviews: