manualshive.com logo in svg

Huawei AR1200-S Series, Configuration Manual, Page: 49 / 308

Share
Download
Huawei AR1200-S Series Configuration Manual Download Page 49

2

 HTTPS Configuration

About This Chapter

The Hypertext Transfer Protocol Secure (HTTPS) protocol provides secure web access using
security mechanisms provided by the Secure Sockets Layer (SSL) protocol, including data
encryption, identity authentication, and message integrity check.

2.1 HTTPS Overview

HTTPS is a combination of the Hypertext Transfer Protocol (HTTP) and the Secure Sockets
Layer (SSL) protocol.

2.2 HTTPS Features Supported by the AR1200-S

The AR1200-S supports the HTTPS server function.

2.3 Configuring the AR1200-S as an HTTPS Server

The HTTPS server function allows users to securely access the AR1200-S on web pages.

2.4 Configuration Examples

This section provides an HTTPS configuration example.

Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security

2 HTTPS Configuration

Issue 02 (2012-03-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

35

Summary of Contents for AR1200-S Series





















































































































































































































































































































Reviews:

No comments