Huawei AR1200-S Series Configuration Manual Download Page 4

Page: 4 / 308

Command Conventions

The command conventions that may be found in this document are defined as follows.

Convention

Description

Boldface

The keywords of a command line are in

boldface

Italic

Command arguments are in

italics

[ ]

Items (keywords or arguments) in brackets [ ] are optional.

{ x | y | ... }

Optional items are grouped in braces and separated by
vertical bars. One item is selected.

[ x | y | ... ]

Optional items are grouped in brackets and separated by
vertical bars. One item is selected or no item is selected.

{ x | y | ... }

Optional items are grouped in braces and separated by
vertical bars. A minimum of one item or a maximum of all
items can be selected.

[ x | y | ... ]

Optional items are grouped in brackets and separated by
vertical bars. Several items or no item can be selected.

&<1-n>

The parameter before the & sign can be repeated 1 to n times.

A line starting with the # sign is comments.

Interface Numbering Conventions

Interface numbers used in this manual are examples. In device configuration, use the existing
interface numbers on devices.

Change History

Updates between document issues are cumulative. Therefore, the latest document issue contains
all updates made in previous issues.

Changes in Issue 02 (2012-03-30)

Based on issue 01 (2011-12-30), the document is updated as follows:

The following information is modified:

2.2 HTTPS Features Supported by the AR1200-S

13.3.5 Configuring key-string of a key-id

Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security

About This Document

Issue 02 (2012-03-30)

Huawei Proprietary and Confidential

iii

Summary of Contents for AR1200-S Series





















































































































































































































































































































Search results

Summary of Contents for AR1200-S Series

Reviews:

Huawei AR1200-S Series, Configuration Manual, Page: 4 / 308

Search results

Summary of Contents for AR1200-S Series

Reviews: