manualshive.com logo in svg

Huawei AR1200-S Series, Configuration Manual, Page: 244 / 308

Share
Download
Huawei AR1200-S Series Configuration Manual Download Page 244

 For security reasons your password will not be saved in the configuration. Plea
se make a note of it.
 Choice no password ,please enter the enter-key.
 Please enter Password:
 Start certificate enrollment ...
 Certificate enrolling now,It will take a few minutes or more.
Please waiting...
[Router]
 The certificate enroll successful.

NOTE

You will be prompted to enter the password during certificate enrollment. If you do not have a password, press

Enter

.

Step 2

Configure a client SSL policy.

# Enable SSL server authentication.

[Router] 

ssl policy sslclient type client

[Router-ssl-policy-sslclient] 

server-verify enable

# Specify the PKI domain 

cwmp0

 in the client SSL policy.

[Router-ssl-policy-sslclient] 

pki-realm cwmp0

[Router-ssl-policy-sslclient] 

quit

Step 3

Enable the CWMP function on the Router.

[Router] 

cwmp

[Router-cwmp] 

cwmp enable

Step 4

Apply the SSL policy to CWMP.

[Router-cwmp] 

cwmp ssl-client ssl-policy sslclient

Step 5

Configure the Router to automatically initiate connections to the ACS.

# Configure the URL used by the Router to connect to the ACS.

[Router-cwmp] 

cwmp acs url https://www.acs.com:80/acs

# Enable the Router to send Inform messages.

[Router-cwmp] 

cwmp cpe inform interval enable

# Set the interval at which the Router sends Inform messages to 1000 seconds.

[Router-cwmp] 

cwmp cpe inform interval 1000

# Configure the Router to send an Inform message at 2011-01-01 20:00:00.

[Router-cwmp] 

cwmp cpe inform time 2011-01-01T20:00:00

Step 6

Set CWMP parameters on the Router.

# Configure the interface that the Router uses to connect to the ACS.

[Router-cwmp] 

cwmp cpe connect interface Ethernet 1/0/0

# Set the user name and password that the Router uses for authentication by the ACS.

[Router-cwmp] 

cwmp acs username newacsname

[Router-cwmp] 

cwmp acs password newacspsw

# Configure the user name and password that the Router uses to authenticate the ACS.

[Router-cwmp] 

cwmp cpe username newcpename

[Router-cwmp] 

cwmp cpe password newcpepsw

Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security

11 SSL Configuration

Issue 02 (2012-03-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

230

Summary of Contents for AR1200-S Series





















































































































































































































































































































Reviews:

No comments