manualshive.com logo in svg

Huawei AR1200-S Series, Configuration Manual, Page: 207 / 308

Share
Download
Huawei AR1200-S Series Configuration Manual Download Page 207

retransmission of LSAs on certain links and save bandwidth resources. The AR1200-S can
use basic ACLs to filter outgoing LSAs. For details, see Optimizing an OSPF Network.

l

Apply a basic ACL to IP multicast.

Certain functions of the Internet Group Management Protocol (IGMP), Protocol
Independent Multicast-Dense Mode (PIM-DM) and Protocol Independent Multicast-
Sparse Mode (PIM-SM) need to reference basic ACLs. For details, see Configuration Guide
- Multicast.

l

Apply a basic ACL to control users that can connect to an FTP or TFTP server.

When the AR1200-S functions as an FTP or TFTP server, you can configure a basic ACL
to allow only the clients that meet certain conditions to access the server. For details, see
(Optional) Configuring an FTP ACL.

l

Apply a basic ACL to a firewall.

The attack defense system protects an internal network against attacks from external
networks. Generally, firewalls are deployed between the internal and external networks to
defend against attacks. A packet filtering firewall filters packets by using an ACL. The
AR1200-S uses a basic ACL to configure the packet filtering firewall. For details, see 

3.4

Configuring the Packet Filtering Firewall

.

l

Apply a basic ACL to NAT.

Network Address Translation (NAT) enables hosts on a private network to access the public
network. A NAT address pool is a set of public IP addresses. When a packet from a private
network reaches the public network by using address translation, one IP address in the NAT
address pool is selected as the source address after translation. The AR1200-S uses a basic
ACL to classify IP addresses in the NAT address pool so that source addresses of data
packets matching the basic ACL are translated. For details, see Associating an ACL with
an Address Pool.

l

Apply an ACL to an interface to filter packets on the interface.

The AR1200-S can filter packets on an interface using an ACL.

–

If the action in an ACL rule is 

deny

, the AR1200-S discards all packets matching the

rule.

–

If the action in an ACL rule is 

permit

, the AR1200-S forwards all packets matching

the rule.

Perform the following steps to apply a basic ACL to an interface:

1.

Run:

system-view

The system view is displayed.

2.

Run:

interface

 

interface-type interface-number

The interface view is displayed.

3.

Run:

traffic-filter

 { 

inbound

 | 

outbound

 } 

acl

 { 

acl-number

 | 

name

 

acl-name

 }

A basic ACL is applied to the interface.

----End

Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security

10 ACL Configuration

Issue 02 (2012-03-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

193

Summary of Contents for AR1200-S Series





















































































































































































































































































































Reviews:

No comments