manualshive.com logo in svg

Huawei AR1200-S Series, Configuration Manual, Page: 25 / 308

Share
Download
Huawei AR1200-S Series Configuration Manual Download Page 25

l

Run the 

display authorization-scheme

 [ 

authorization-scheme-name

 ] command to check

the authorization scheme configuration.

l

Run the 

display access-user

 [ 

domain

 

domain-name

 | 

interface

 

interface-type

 

interface-

number

 [ 

vlan

 

vlan-id

 [ 

qinq

 

qinq-vlan-id

 ] ] | 

ip-address

 

ip-address

 [ 

vpn-instance

instance-name

 ] | 

mac-address

 

mac-address

 | 

slot

 

slot-id

 | 

ssid

 

ssid-name

 | 

user-id

 

user-

number

 ] command to check the summary of all online users.

l

Run the 

display domain

 [ 

name

 

domain-name

 ] command to check the domain

configuration.

----End

1.4 Configuring RADIUS AAA

RADIUS is often used to implement authentication, authorization, and accounting (AAA).
RADIUS uses the client/server model and protects a network from unauthorized access. It is
often used in network environments that require high security and control of remote user access.

1.4.1 Establishing the Configuration Task

Before configuring RADIUS authentication, authorization, and accounting, familiarize yourself
with the applicable environment, complete the pre-configuration tasks, and obtain the data
required for the configuration. This will help you complete the configuration task quickly and
accurately.

Applicable Environment

To prevent unauthorized users from attacking a network, configure AAA:

l

Authentication: checks whether a user is allowed to access a network. Only authenticated
users can access the network.

l

Authorization: authorizes a user to use specific services.

l

Accounting: records all the operations performed by a user and the service type, start time,
and data traffic.

RADIUS protects a network from unauthorized access. It is often used on networks that require
high security and control remote user access.

Pre-configuration Tasks

Before configuring RADIUS authentication, authorization, and accounting, complete the
following task:

l

Configuring physical attributes for interfaces to ensure that the physical layer status of the
interfaces is Up

Data Preparation

To configure RADIUS authentication, authorization, and accounting, you need the following
data.

Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security

1 AAA Configuration

Issue 02 (2012-03-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

11

Summary of Contents for AR1200-S Series





















































































































































































































































































































Reviews:

No comments