manualshive.com logo in svg

Huawei AR1200-S Series, Configuration Manual, Page: 51 / 308

Share
Download
Huawei AR1200-S Series Configuration Manual Download Page 51

Applicable Environment

When users access a remote AR1200-S functioning as an HTTP server, the following problems
exist:

l

Users cannot authenticate the AR1200-S.

l

Privacy of data transmitted between users and the AR1200-S cannot be protected.

l

Integrity of data transmitted between users and the AR1200-S cannot be ensured, and the
data may be modified by unauthorized users.

To solve the preceding problems, configure the AR1200-S as an HTTPS server. The AR1200-
S uses the SSL protocol's data encryption, identity authentication, and message integrity check
mechanisms to protect security of data transmitted between users and the AR1200-S. These
mechanisms ensure that users securely access a remote AR1200-S on web pages.

Procedure

Step 1

Run:

system-view

The system view is displayed.

Step 2

Configure a server SSL policy. For details, see 

11.3 Configuring a Server SSL Policy

.

Step 3

Run:

http secure-server ssl-policy

 

ssl-policy

An SSL policy is applied to the HTTPS service.

By default, no SSL policy is applied to the HTTPS service on the AR1200-S.

Step 4

(Optional) Run:

http secure-server port

 

port

The port number is set for the HTTPS service.

By default, the port number of the HTTPS service is 443.

Step 5

Run:

http secure-server enable

The HTTPS server function is enabled on the AR1200-S.

By default, the HTTPS server function is disabled on the AR1200-S.

----End

Example

# Run the 

display current-configuration

 command to check the configuration of the HTTPS

server.

<Huawei> 

display current-configuration | include http secure-server

 http secure-server port 
1026                                                             
 http secure-server ssl-policy 
user                                                   
 http secure-server enable

Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security

2 HTTPS Configuration

Issue 02 (2012-03-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

37

Summary of Contents for AR1200-S Series





















































































































































































































































































































Reviews:

No comments