manualshive.com logo in svg

Huawei AR1200-S Series, Configuration Manual, Page: 188 / 308

Share
Download
Huawei AR1200-S Series Configuration Manual Download Page 188

The AR1200-S supports a maximum of 19 attack defense policies, including the 

default

 attack

defense policy. The 

default

 attack defense policy is automatically generated in the system by

default and is applied to all boards. The 

default

 attack defense policy cannot be deleted or

modified. The other 18 policies can be created and deleted.

Step 3

(Optional) Run:

description

 

text

The description of the attack defense policy is configured.

----End

9.4.3 (Optional) Configuring a Blacklist

A blacklist is a set of unauthorized users. The packets that match ACL rules bound to the blacklist
are discarded.

Context

To defend against malicious attacks, the AR1200-S adds users with a specific characteristic to
a blacklist by using ACL rules and discards the packets sent from the users in the blacklist.

Procedure

Step 1

Run:

system-view

The system view is displayed.

Step 2

Run:

cpu-defend policy

 

policy-name

The attack defense policy view is displayed.

Step 3

Run:

blacklist

 

blacklist-id

 

acl

 

acl-number

A blacklist is created.

A maximum of eight blacklists can be configured on the AR1200-S.

The ACL referenced by the blacklist can be a basic ACL, an advanced ACL, or a Layer 2 ACL.

By default, no blacklist is configured on the AR1200-S.

----End

9.4.4 (Optional) Configuring the Rate Limit for Packets Sent to the
CPU

The AR1200-S sets different rate limits for packets of different types or discards packets of a
certain type to protect the CPU.

Procedure

Step 1

Run:

system-view

Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security

9 Local Attack Defense Configuration

Issue 02 (2012-03-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

174

Summary of Contents for AR1200-S Series





















































































































































































































































































































Reviews:

No comments