manualshive.com logo in svg

Huawei AR1200-S Series, Configuration Manual, Page: 3 / 308

Share
Download
Huawei AR1200-S Series Configuration Manual Download Page 3

About This Document

Intended Audience

This document provides the basic concepts, configuration procedures, and configuration
examples in different application scenarios of the security feature supported by the AR1200-S.

This document describes how to configure the security feature.

This document is intended for:

l

Data configuration engineers

l

Commissioning engineers

l

Network monitoring engineers

l

System maintenance engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

DANGER

Indicates a hazard with a high level of risk, which if not
avoided, will result in death or serious injury.

WARNING

Indicates a hazard with a medium or low level of risk, which
if not avoided, could result in minor or moderate injury.

CAUTION

Indicates a potentially hazardous situation, which if not
avoided, could result in equipment damage, data loss,
performance degradation, or unexpected results.

TIP

Indicates a tip that may help you solve a problem or save
time.

NOTE

Provides additional information to emphasize or supplement
important points of the main text.

 

Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security

About This Document

Issue 02 (2012-03-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

ii

Summary of Contents for AR1200-S Series





















































































































































































































































































































Reviews:

No comments