manualshive.com logo in svg

Huawei AR1200-S Series, Configuration Manual, Page: 282 / 308

Share
Download
Huawei AR1200-S Series Configuration Manual Download Page 282

Key-string is the authentication string used while sending and receiving the packets. In case of
plain text the password string is displayed as un-encrypted text. In case of Cipher text the
password string is displayed in encrypted form. Both are case sensitive.

NOTE

Key-id will be inactive if the key-string is not configured.

----End

13.3.6 Configuring Authentication Algorithm of a key-id

Procedure

Step 1

Run:

system-view

The system view is entered.

Step 2

Run:

keychain

 

keychain-name

The keychain view is entered.

Step 3

Run:

key-id

 

key-id

Key-id is created and key-id view is entered.

Step 4

Run:

algorithm

 { 

hmac-md5

 | 

hmac-sha1-12

 | 

hmac-sha1-20

 | 

md5

 | 

sha-1

 | 

simple

 }

The authentication algorithm for the key-id is configured.

NOTE

Key-id will be inactive if the authentication algorithm is not configured.

----End

13.3.7 Configuring a key-id as the Default send-key-id

Procedure

Step 1

Run:

system-view

The system view is entered.

Step 2

Run:

keychain

 

keychain-name

The keychain view is entered.

Step 3

Run:

key-id

 

key-id

Key-id is created and key-id view is entered.

Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security

13 Keychain Configuration

Issue 02 (2012-03-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

268

Summary of Contents for AR1200-S Series





















































































































































































































































































































Reviews:

No comments