manualshive.com logo in svg

Huawei AR1200-S Series, Configuration Manual, Page: 74 / 308

Share
Download
Huawei AR1200-S Series Configuration Manual Download Page 74

Follow-up Procedure

Run the 

firewall black-white-list save

 command to save the blacklist and whitelist to the

specified configuration file to load next time.

3.6.3 Configuring Blacklist and Whitelist Using the Configuration
File

You can configure blacklist and whitelist entries in a batch by loading the configuration file.

Prerequisites

The configuration file for storing the blacklist and whitelist is available.

Context

The configuration file must be in txt format, and the contents are as follows:

[FirewallBlacklist] # A blacklist entry
IPAddress =                # An IP address in the blacklist, in dotted decimal 
notation
VPNName =                  # (Optional) VPN instance of the blacklist
[FirewallWhitelist]        # A whitelist entry
IPAddress =                # An IP address in the whitelist, in dotted decimal 
notation
VPNName =                  # (Optional) VPN instance of the whitelist, in dotted 
decimal notation

A configuration file can contain multiple entries, but each entry must be edited separately. Blank
lines are allowed between lines.

[FirewallBlacklist]
IPAddress = 210.10.10.1
VPNName = vpna
[FirewallBlacklist]
IPAddress = 220.10.10.2
VPNName = 

[FirewallWhitelist]
IPAddress = 10.10.10.1
VPNName = vpnb
[FirewallWhitelist]
IPAddress =20.20.20.1
VPNName = 

NOTE

A configuration file can contain up to 50000 lines.

Procedure

Step 1

Run:

system-view

The system view is displayed.

Step 2

Run:

firewall black-white-list load

 

configuration-file

 

configuration-file-name

The blacklist and whitelist configuration file is loaded.

The configured blacklist takes effect only after you run the firewall blacklist enable command
to enable the blacklist.

Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security

3 Firewall Configuration

Issue 02 (2012-03-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

60

Summary of Contents for AR1200-S Series





















































































































































































































































































































Reviews:

No comments