manualshive.com logo in svg

Huawei AR1200-S Series, Configuration Manual, Page: 155 / 308

Share
Download
Huawei AR1200-S Series Configuration Manual Download Page 155

system-view

The system view is displayed.

Step 2

Run:

arp speed-limit source-mac

 

maximum

 

maximum

The rate limit of ARP packets is set.

Step 3

(Optional)Run:

arp speed-limit source-mac

 

ip-address

 

maximum

 

maximum

The rate limit of ARP packets with a specified source MAC address is set.

After the preceding configurations are complete, the rate limit of ARP packets with a specified
source MAC address is specified by 

maximum

 in step 3, and the rate limit of ARP packets with

other source MAC addresses is specified by 

maximum

 in step 2.

----End

6.5.7 Setting the Aging Time of Fake ARP Entries

By setting the aging time of fake ARP entries, you can control the frequency of sending ARP
Miss packets to the upper-layer software. This reduces the possibility of attacks to the system.

Context

After the aging time of fake ARP entries is set, the same ARP Miss packet is sent once in the
aging time. After the aging time of fake ARP entries is reached, fake ARP entries are deleted.
If no ARP entry matches the packets forwarded by a device, ARP Miss packets are re-generated
and reported. The device generates fake ARP entries again. The fake ARP entries are deleted
until the device generates correct ARP entries.

Procedure

Step 1

Run:

system-view

The system view is displayed.

Step 2

Run:

interface

 

interface-type

 

interface-number

The interface view is displayed.

The interface type can be Ethernet, GE,Eth-Trunk, or VLANIF.

Step 3

Run:

arp-fake expire-time

 

expire-time

The aging time of fake ARP entries is set.

By default, the aging time of fake ARP entries is 1s.

----End

Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security

6 ARP Security Configuration

Issue 02 (2012-03-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

141

Summary of Contents for AR1200-S Series





















































































































































































































































































































Reviews:

No comments