manualshive.com logo in svg

Huawei AR1200-S Series, Configuration Manual, Page: 36 / 308

Share
Download
Huawei AR1200-S Series Configuration Manual Download Page 36

An accounting scheme is created and the accounting scheme view is displayed.

By default, the 

default

 accounting scheme is used. The default accounting scheme

can be modified, but it cannot be deleted.

4.

Run:

accounting-mode

 

hwtacacs

The accounting mode is set.

By default, non-accounting is used.

NOTE

If multiple accounting modes are configured in an accounting scheme, accounting modes are
used according to the sequence in which they were configured. The AR1200-S uses the
accounting mode that was configured later only after the current accounting mode fails.

5.

(Optional) Run:

accounting start-fail

 { 

online

 | 

offline

 }

The policy for accounting-start failures is configured.

By default, users cannot go online if accounting-start fails.

6.

(Optional) Run:

accounting realtime

 

interval

Real-time accounting is enabled and the interval for real-time accounting is set.

By default, real-time accounting is disabled.

7.

(Optional) Run:

accounting interim-fail

 [ 

max-times

 

times

 ] { 

online

 | 

offline

 }

The maximum number of real-time accounting failures is set and a policy used after
a real-time accounting failure is configured.

After real-time accounting is enabled, the maximum number of real-time accounting
failures is 3 and the AR1200-S keeps paid users online after a real-time accounting
failure by default.

----End

1.5.3 Configuring an HWTACACS Server Template

In an HWTACACS server template, you must specify the IP address, port number, and shared
key of a specified HWTACACS server. Other settings such as the HWTACACS user name
format and traffic unit have default values and can be changed according to network
requirements.

Context

The settings of an HWTACACS server template such as the HWTACACS user name format
and shared key on the HWTACACS client must be the same as those on the HWTACACS server.

Procedure

Step 1

Run:

system-view

Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security

1 AAA Configuration

Issue 02 (2012-03-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

22

Summary of Contents for AR1200-S Series





















































































































































































































































































































Reviews:

No comments