manualshive.com logo in svg

Huawei AR1200-S Series, Configuration Manual, Page: 126 / 308

Share
Download
Huawei AR1200-S Series Configuration Manual Download Page 126

Context

If the AR1200-S does not receive a response after sending an authentication request to a user,
it retransmits the authentication request to the user. If the AR1200-S still fails to receive the
response when the maximum number of times for sending authentication requests is reached, it
does not send the authentication request to the user any more.

Procedure

Step 1

Run:

system-view

The system view is displayed.

Step 2

Run:

dot1x retry

 

max-retry-value

The maximum number of times the AR1200-S sends authentication requests is set.

By default, the AR1200-S retransmits an authentication request to an access user twice.

----End

5.3.17 Checking the Configuration

Procedure

l

Run the 

display dot1x

 [ 

statistics

 ] [ 

interface

 { 

interface-type

 

interface-number1

 [ 

to

interface-number2

 ] } &<1-10> ] or 

display dot1x global

 command to check the 802.1x

authentication configuration.

l

Run the 

display mac-address authen

 [ 

vlan

 

vlan-id

 ] command to check MAC address

entries of the 

authen

 type.

----End

5.4 Configuring MAC Address Authentication

After MAC address authentication is configured, the AR1200-S uses the user MAC address as
the user name and password for authentication.

5.4.1 Establishing the Configuration Task

Before configuring MAC address authentication, familiarize yourself with the applicable
environment, complete the pre-configuration tasks, and obtain the data required for the
configuration. This will help you complete the configuration task quickly and accurately.

Applicable Environment

MAC address authentication can be configured to authenticate terminals on which client
software cannot be installed, such as faxes and printers.

Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security

5 NAC Configuration

Issue 02 (2012-03-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

112

Summary of Contents for AR1200-S Series





















































































































































































































































































































Reviews:

No comments