HT FULLTEST3, User Manual, Page: 98 / 100

FULLTEST3
EN - 96
11. SERVICE
11.1. WARRANTY CONDITIONS
This instrument is guaranteed against material or production defects, in accordance
with our general sales conditions. During the warranty period the manufacturer
reserves the right to decide either to repair or replace the product. Should you need
for any reason to return back the instrument for repair or replacement take prior
agreements with the local distributor from whom you bought it. Do not forget to
enclose a report describing the reasons for returning (detected fault). Use only
original packaging. Any damage occurred in transit due to not original packaging will
be charged anyhow to the customer. The manufacturer will not be responsible for any
damage to persons or things. Accessories (not covered by warranty).
The warranty does not apply to:
x
Repairs made necessary by improper use (including adaptation to particular
applications not foreseen in the instructions manual) or improper combination with
incompatible accessories or equipment.
x
Repairs made necessary by improper shipping material causing damages in
transit.
x
Repairs made necessary by previous attempts for repair carried out by non skilled
or unauthorized personnel.
x
Instruments for whatever reason modified by the customer himself without explicit
authorization of our Technical Dept.
x
The contents of this manual may not be reproduced in any form whatsoever
without the manufacturer’s authorization.
Our products are patented and our logotypes registered. We reserve the right
to modify specifications and prices in view of technological improvements or
developments which might be necessary
.
11.2. AFTER-SALE SERVICE
Shouldn’t the instrument work properly, before contacting your distributor make sure
that batteries are correctly installed and working, check the test leads and replace
them if necessary. Make sure that your operating procedure corresponds to the one
described in this manual. Should you need for any reason to return back the
instrument for repair or replacement take prior agreements with the local distributor
from whom you bought it. Do not forget to enclose a report describing the reasons for
returning (detected fault). Use only original packaging. Any damage occurred in
transit due to not original packaging will be charged anyhow to the customer. The
manufacturer will not be responsible for any damage to persons or things.