![background image](http://html1.mh-extra.com/html/ht/fulltest3/fulltest3_user-manual_2178151007.webp)
FULLTEST3
EN - 5
1.2. DURING USE
CAUTION
An improper use may damage the instrument and/or its components
or injure the operator
x
Only skilled technicians, who know the possible risks involved to the dangerous
voltages use are allowed to operate the instrument
x
The instrument may only be connected to mains voltage as indicated on the type
shield
x
The instrument may only be used within the operating ranges as specified in the
technical data section
x
Disconnect the test leads from the circuit under test before selecting any function
x
Only touch test leads and test probes at handle surface provided. Never directly
touch test probes
x
Never touch any unused terminal when the instrument is connected to circuits.
x
Do not measure resistance in presence of external voltages; although the
instrument is protected, an excessive voltage may cause malfunctioning
x
Do not open the instrument! Dangerous voltages inside
x
Connecting one terminal to the test object and working with one probe or holding
both probes in one hand is prohibited
x
Use safety probes with protection against contact or with two-hand operation only.
Always hold only one probe in one hand
x
It is prohibited to touch the unit under test during the test. If need be, additional
measures must be taken (e.g. cover made of insulating mats) to protect the
person performing the test against inadvertent contact with the unit under test
1.3. AFTER USE
Disconnect all test leads from the circuit under test and switch off the instrument.
Summary of Contents for FULLTEST3
Page 1: ... Copyright HT ITALIA 2020 Release EN 2 01 13 01 2020 FULLTEST3 User manual ...
Page 2: ......
Page 99: ......