• If only the SCSI controller location number is specified, the Hyper-V server automatically connects
the virtual disk to the specified SCSI controller location of an available SCSI controller (0 to 3).
• If both the SCSI controller ID number and SCSI controller location number are specified, the virtual
disk is connected to the specified location of the specified SCSI controller.
Settings
The following table lists the service details for the Allocate Replicated Volumes on Existing Copy Topology
service template.
Property key
Property name
Description
Required or optional
hyperv.targetHost
Hyper-V server host
name
Specifies the host name
or IP address of the
Hyper-V server. IPv6
addresses are not
supported.
R
UserResponsePlugin.to
Address
TO addresses
Specify the email
addresses to enter in the
TO field of notification
emails sent when the
service is waiting for a
user response. Separate
multiple addresses with
commas. Example:
mailA,mailB
O
UserResponsePlugin.cc
Address
CC addresses
Specify the email
addresses to enter in the
CC field of notification
emails sent when the
service is waiting for a
user response. Separate
multiple addresses with
commas. Example:
mailA,mailB
O
UserResponsePlugin.bc
cAddress
BCC addresses
Specify the email
addresses to enter in the
BCC field of notification
emails sent when the
service is waiting for a
user response. Separate
multiple addresses with
commas. Example:
mailA,mailB
O
UserResponsePlugin.ma
ilSubject
Subject line
Specify the subject line
of notification emails
sent when the service is
waiting for a user
response.
O
Table Continued
Additional service templates
347
