NOTE:
Automation Director automatically sets the ALUA attribute as follows for data migration:
• P-VOL -- Active/Optimized
• S-VOL -- Active/Non-optimized
If necessary, you can set the ALUA attribute manually to continue using high availability technology after
using this service.
Submit Service Request settings
The following table lists the Submit Service Request settings for the Create High Availability Pair for
Migration service template.
Navigation pane
Settings pane
Description
Migration Source Settings:
Source Configuration Manager
Connection:
Provides a table from which you
can choose the source
Configuration Manager
Connection used for migration.
Source Storage System:
Provides a table from which you
can choose the source storage
system.
Source Volumes Filter:
Specifies filters to narrow down
the selection of source volumes.
You can filter by key (LDEV ID,
Label, or Pool ID), using an
operator, or by a specific value.
Join Filters by:
Specifies either "and" or "or" for
joining filters.
Source Volumes:
Provides a table from which you
can choose the source volumes.
Your selections are shown below
the table.
Migration Target Settings:
Target Configuration Manager
Connection:
Provides a table from which you
can choose the target
Configuration Manager
connection used for the
migration.
Target Storage System:
Provides a table from which you
can choose the target storage
system.
Pool:
Provides a table from which you
can choose the pool.
Volume Label:
Specifies the volume label.
LUN Starts from:
Specifies the starting value for
the LUN. If necessary, you can
specify a Single Value, Multiple
Values, or a Range.
Table Continued
158
Services catalog
