The syntax is:
restoresystem {/dir
directoryname
[/auto] | /help}
where:
• /dir is an absolute or relative directory path that contains data that is backed up by the
backupsystem
command
• /auto directs the Automation Director and XP7 Command View Advanced Edition services and
database to start and stop automatically.
NOTE:
Before restoring Automation Director, confirm that the following conditions are the same for the
backup source Automation Director server host and the restore destination Automation Director server
host:
• Types, versions, and revisions for the installed XP7 Command View Advanced Edition products.
• Installation location for each XP7 Command View Advanced Edition product, Common Component,
XP7 Command View Advanced Edition product database, and Common Component database.
• The IP address and host name of the machines.
• System locale and character code.
If the above conditions are not the same, Automation Director cannot be restored.
setremoteconnection
The
setremoteconnection
command adds or updates agentless connection-destination definitions in
Automation Director through a CSV file.
The syntax is:
setremoteconnection {/file
input-file
/user
username
{/password
password
| /passwordfile
passwordfile
} | /help}
where:
• /file is the path of the file that contains the agentless connection-destination definitions to be added or
updated; if the specified file does not exist, an error is generated. Absolute paths and relative paths
are both acceptable.
• /user is the name of the user executing the command. The user name can consist of any single-byte
alphanumeric characters including ( ! # $ % & ' ( ) * + - . = @ \ ^ _ |) from 1 - 256 characters in length.
The user name is case sensitive.
• /password is the password of the user that is specified in the /user option. Either this option or /
passwordfile must be specified. If both options are specified, or if neither option is specified, an error is
generated. The password can be from 1 to 256 single-byte alphanumeric characters in length
including (! # $ % & ' ( ) * + - . = @ \ ^ _ |).
• /passwordfile is a password file (with absolute or relative path) that includes the encrypted user
credentials for the selected user. Either this option or the /password option must be specified. If both
options are specified, or if neither option is specified, an error is generated.
setupcluster
The
setupcluster
command sets up an Automation Director cluster environment.
100
CLI commands
