Type
Zone name
Zone alias name (Host side/Storage
side)
If the output string is
too long
When the output string is over 60
characters, the 61st and subsequent
characters are truncated.
When the output string is over 64
characters or more, the 65th and
subsequent characters are truncated.
Validation
An error occurs if the return value is
one of following:
• Other than String
• When starting from non-alphabetic
characters.
• When having a non-standard prefix
for the zone. ("LSAN_","TI_",
"QOS[HML][0-9]+_")(case ignored)
An error occurs if the return value is
one of following:
• Other than String
• When starting from non-alphabetic
characters.
Add Host to Cluster in vCenter: Service details
The Add Host to Cluster in vCenter service template enables you to allocate existing volumes used as
datastores by ESX cluster hosts to a new ESX host.
The following service template details apply to the Add Host to Cluster in vCenter service template.
Software prerequisites
The following prerequisites are required to use the Add Host to Cluster in vCenter service template:
• Configuration Manager REST API v8.5.3 or later
• Brocade Network Advisor (BNA) 14.2 (SAN System Administrator or Zone Administrator role is
required)
• VMware vSphere Hypervisor (ESXi) v6.5, v6.5 U1/U2
• VMware vCenter v6.5, v6.5 U1/U2
• Python 3.5
The following libraries are required:
◦ pyvmomi 6.5.0.2017.5.post1
◦ six 1.11.0
◦ urlib3 1.22
◦ certifi 2017.1.5
◦ idna 2.6
◦ chardet 3.0.4
◦ requests 2.18.4
Setup prerequisites
Complete the following setup prerequisites if you have not already done so:
Add Host to Cluster in vCenter: Service details
175
