•
Removing and replacing the primary or secondary PCIe riser cages
on page 54
•
Removing and replacing the tertiary PCIe riser cage
on page 55
8.
Disconnect the power cable from the GPU.
9.
Remove the GPU enablement board from the GPU-enabled riser cage.
• Primary or secondary riser cage
• Tertiary riser cage
To replace the component, reverse the removal procedure.
Removing and replacing a DIMM
To identify the DIMMs installed in the server, see "DIMM slot locations" in the server user guide.
Procedure
1.
Power down the server (
on page 41).
2.
Remove all power:
86
Removal and replacement procedures
Summary of Contents for ProLiant DL388 Gen10
