To replace the component, reverse the removal procedure.
Removing and replacing an expansion slot blank
WARNING:
To reduce the risk of personal injury, electric shock, or damage to the equipment, remove
power from the server by removing the power cord. The front panel Power On/Standby button does not
shut off system power. Portions of the power supply and some internal circuitry remain active until AC
power is removed.
CAUTION:
For proper cooling, do not operate the server without the access panel, baffles, expansion
slot covers, or blanks installed. If the server supports hot-plug components, minimize the amount of time
the access panel is open.
Procedure
1.
Power down the server (
on page 41).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
Removal and replacement procedures
59
Summary of Contents for ProLiant DL388 Gen10
