HPE ProLiant DL388 Gen10 Maintenance And Service Manual Download Page 127

Page: 127 / 169

Item LED

Status

Definition

Flashing green

The drive ejection request is pending.

Off

The drive has been ejected.

uFF drive components and LEDs

Item

Description

Status

Locate

• Off—Normal

• Solid blue—The drive is being identified by a host

application

• Flashing blue—The drive firmware is being updated

or requires an update

uFF drive ejection latch

Removes the uFF drive when released

Do not remove LED

• Off—OK to remove the drive. Removing the drive

does not cause a logical drive to fail.

• Solid white—Do not remove the drive. Removing

the drive causes one or more of the logical drives to
fail.

Table Continued

Component identification

127

Summary of Contents for ProLiant DL388 Gen10










































































































































































Search results

Summary of Contents for ProLiant DL388 Gen10

Reviews:

Related manuals for ProLiant DL388 Gen10

Brands by name

Popular brands

HPE ProLiant DL388 Gen10, Maintenance And Service Manual

Search results

Summary of Contents for ProLiant DL388 Gen10

Reviews:

Related manuals for ProLiant DL388 Gen10

Brands by name

Popular brands