HPE ProLiant DL388 Gen10 Maintenance And Service Manual Download Page 96

Page: 96 / 169

Allow the heatsink to cool.

Using a T-30 Torx screwdriver, loosen the heatsink nuts.

Lift the processor heatsink assembly up and away from the system board.

Turn the processor heatsink assembly over on a work surface with the processor facing up.

Install the dust cover on each processor socket on the failed system board.

16.

Loosen the system board thumbscrews.

17.

Remove the system board, using the handle to lift it out of the chassis.

Replacing the system board

18.

Install the spare system board.

Removal and replacement procedures

Summary of Contents for ProLiant DL388 Gen10










































































































































































Search results

Summary of Contents for ProLiant DL388 Gen10

Reviews:

Related manuals for ProLiant DL388 Gen10

Brands by name

Popular brands

HPE ProLiant DL388 Gen10, Maintenance And Service Manual

Search results

Summary of Contents for ProLiant DL388 Gen10

Reviews:

Related manuals for ProLiant DL388 Gen10

Brands by name

Popular brands