To replace the component, reverse the removal procedure.
Removing and replacing the small form factor universal
media bay
Procedure
1.
Power down the server (
on page 41).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Do one of the following:
• Extend the server from the rack (
Extend the server from the rack
on page 42).
• Remove the server from the rack (
Remove the server from the rack
on page 42.
4.
Remove the access panel (
on page 44).
5.
Remove all hot-plug hard drives (
on page 46).
6.
Remove the fan cage (
Removing and replacing the fan cage
on page 61) .
7.
Disconnect all cables from the universal media bay.
8.
Remove the universal media bay.
Removal and replacement procedures
63
Summary of Contents for ProLiant DL388 Gen10
