HPE ProLiant DL388 Gen10 Maintenance And Service Manual Download Page 43

Page: 43 / 169

Procedure

Disconnect the cabling and remove the server from the rack. For more information, see the documentation
that ships with the rack mounting option.

Place the server on a sturdy, level surface.

Access the product rear panel

Releasing the cable management arm

Release the cable management arm and then swing the arm away from the rack.

Accessing the Systems Insight Display

The Systems Insight Display is only supported on SFF models. To access a Systems Insight Display, use the
following procedure.

Procedure

Press and release the panel.

After the display fully ejects, rotate the display to view the LEDs.

Removal and replacement procedures

Summary of Contents for ProLiant DL388 Gen10










































































































































































Search results

Summary of Contents for ProLiant DL388 Gen10

Reviews:

Related manuals for ProLiant DL388 Gen10

Brands by name

Popular brands

HPE ProLiant DL388 Gen10, Maintenance And Service Manual

Search results

Summary of Contents for ProLiant DL388 Gen10

Reviews:

Related manuals for ProLiant DL388 Gen10

Brands by name

Popular brands