Remove the access panel
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the drives and the internal
system components to cool before touching them.
CAUTION:
Do not operate the server for long periods with the access panel open or removed.
Operating the server in this manner results in improper airflow and improper cooling that can lead to
thermal damage.
To remove the component:
Procedure
.
2. Extend the server from the rack
.
3.
Open or unlock the locking latch, slide the access panel to the rear of the chassis, and remove the access
panel.
Release the full-length expansion board retainer
Procedure
1.
Power down the server (
on page 41).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Do one of the following:
44
Removal and replacement procedures
Summary of Contents for ProLiant DL388 Gen10
