To replace the component, reverse the removal procedure.
Removing and replacing the 2-SFF drive cage
Procedure
1.
Power down the server (
on page 41).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Do one of the following:
• Extend the server from the rack (
Extend the server from the rack
• Remove the server from the rack (
Remove the server from the rack
on page 42).
4.
Remove the access panel (
on page 44).
5.
on page 46).
6.
Disconnect all cables from the drive backplane.
7.
Remove the drive cage.
72
Removal and replacement procedures
Summary of Contents for ProLiant DL388 Gen10
