HP X Class 500/550MHz, Reference Manual

Page: 17 / 149

Chapter 1 17
System Overview
HP Visualize Personal Workstation Overview
HP V
ISUALIZE
Personal Workstation Overview
The following table provides an overview of the HP V
ISUALIZE
Personal X-Class
Workstation.
How to use the table:
Table 1-1. Personal Workstation Overview
Component Description
Microprocessor
Intel Pentium® III Xeon™ processor with 512 KB of L2 cache memory, or the
Pentium III Xeon processor with 1 MB of L2 cache memory.
External
Processor Bus
(front side bus) 500 MHz, 550 MHz and 100 MHz FSB
Level 2 Cache
Bus
Runs at the same speed (full speed) as the processor
Operating
System
All models are preloaded with Window NT® 4.0
Main Memory Note: Registered ECC SDRAM memory modules cannot be mixed with
Unbuffered modules.
There are four DIMM sockets supporting: 512 MB Registered 100 MHz
ECC SDRAM
1
memory modules to a maximum of 2 GB, 128 MB, 256 MB
or 512 MB1 of unbuffered 100 MHz ECC SDRAM.
Mass Storage
Two third-height 3.5-inch floppy disk drive front-access openings (one for the floppy
disk drive and one free) Three half-height 5.25-inch drive front-access openings Two
3.5-inch hard disk drive internal-access spaces
The internal hard disk drives have 6.2 GB or 9.1 GB Ultra-Wide SCSI Low Profile
(LP) connectors. Accessory: HP FastRAID 2
nd
generation, support for RAID 0 or 1 of
2
×
6.2 GB or 2
×
9.1 GB
SCSI Connectors Dual SCSI controller:
Adaptec AIC 7880 Ultra-Wide 16-bit integrated SCSI controller (40 MB/s).
Ultra-Wide 16-bit SCSI on LAN + SCSI Combo board for both wide
external and narrow internal drives provided with internal narrow cable.
Subsystem with HP FastRAID Port.